Table of Contents
Advertisement
(38) TOFL/R sensor ASY replacement
Removal
1. Remove the upper cover.
2. Remove the screws securing the upper guide F on its left and right, and release it to the front.
3. Remove the print head.
4. Disconnect the TOFL/R cable from the carriage PC board.
5. Remove the small screws by precision driver, and remove the TOFL/R sensor.
Installation
1. Install the TOFL/R sensor assembly by reversing the removal procedure.
2. After installation, the following adjustments are required:
- TOF sensor's voltage adjustment
- Top-of-forms adjustment (factory use)
- Skew detection value adjustment
TOFL sensor ASY
TOFL sensor ASY
Figure 4.55 TOFL/R sensor ASY replacement
81
Advertisement
Table of Contents
