Platen Roller; Paper Sensor - Fujitsu FTP-628WSL210 Series User Manual

5.2 Platen Roller

Please service the platen roller once a month.
1. Please open the paper cover. (Refer to chapter 2.7)
2. Soak a cotton ball with some alcohol and wipe the platen
roller gently until it is clean. Please use isopropyl alcohol.
3. With a soft cloth completely wipe off the platen roller and
only close the cover when it is completely dry.

5.3 Paper Sensor

Please service the paper sensor once a month.
1. Please open the paper cover. (Refer to chapter 2.7)
2. Please remove the dust particles with a soft nylon brush
etc.
Important
The paper sensor is an optical sensor. This lens might scratch if
too much pressure is applied to it when cleaning. As a result the
printer might not detect the paper correctly.
5 Maintenance
35