(12) Upper Cover removal and Installation
Removal
1. Remove the control panel.
2. Remove the two screws securing the upper cover.
3. Raise the paper table.
4. Disengage the hooks on the front left and right of the upper cover, then lift off the upper cover.
5. Remove the paper table.
Installation
1. Install the paper table.
2. When installing the upper cover, pass the control panel cable and cover open switch cable through the
openings on the upper cover and control panel holder.
3. Hereafter, follow the removal procedure in reverse order.
Screw
Upper cover
Hook
Hook
Unhooking on the left
Unhooking on the right
Figure 4.24 Removing the Upper cover
53