Configuring Name Information - Siemens CCDA1415-DN Instruction Manual

11.6

Configuring Name Information

Siemens Building Technologies
Fire & Security Products
Use the Name Configuration Menu to select which name information appears on-
screen. To display this screen, select Name Configuration Menu from the On-
Screen Text Display screen. The following screen appears:
NAME CONFIGURATION MENU
CAMERA NAME
AREA NAME
PRESET NAME
PATTERN NAME
ALARM NAME
FOCUS FAR to program names
RESET PROGRAMMABLE NAMES
EXIT
Fig. 46 Name Configuration menu
You can choose to enable or disable the display of camera, area, preset, pattern,
and alarm names from this screen. You can reset all programmable names to their
default settings.
Changing the Display of Selected Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu. The On-
Screen Text Display appears.
2. Move the highlight to Name Configuration Menu and select.
The Name Configuration Menu appears.
3. Move the highlight bar to the item whose display setting you want to change.
4. Change the setting.
Choose On to display name information on the monitor.
–
Choose Off to prevent name information from appearing on the monitor.
–
The default settings are Off for Camera, Areas, Presets, and Patterns,
and On for Alarms.
5. Repeat steps 3 and 4 for each item you want to change.
6. Do one of the following:
To reset all programmable names to their default values, select Reset
–
Programmable Names. Continue with step 7.
If you do not want to reset the programmable names, continue with step 8.
–
7. The following prompt appears on the screen:
RESET PROGRAMMABLE NAMES
To reset all names to the default value, select Yes. The Name
–
Configuration Menu displays. "Programmable Names Have Been Reset"
appears at the bottom of the screen.
To cancel resetting of names, select No. The Name Configuration Menu
–
displays.
The default selection is No.
8. Do one of the following:
To change programmable name information. continue with Assigning or
–
Changing Name Information.
To return to the On-Screen Text Display settings screen select Exit.
–
Continue with step 9.
9. Select Exit. The Dome Configuration Menu appears.
Configuring Text Displayed On-Screen
ON/OFF
ON/OFF
ON/OFF
ON/OFF
OFF/ON
NO
BE_CCDA1415-DN.doc
127
05.2004