Indoor Ceiling/Wall Mounting (Optional) - Siemens CCDA1415-DN Instruction Manual

About the Dome Camera
5.4

Indoor Ceiling/Wall Mounting (Optional)

82
Siemens Building Technologies
Fire & Security Products
The camera dome attaches to one of the following optional indoor mounting
structures (Fig. 4).
2GF1191-8BJ Hard Ceiling Bracket
This bracket enables the Top Hat housing to be recessed in the ceiling. The
bracket is mounted to the Top Hat and installed in a hole cut in the ceiling-
perfect for sheet rock, plaster, or solid ceilings. The Hard Ceiling Bracket can be
installed entirely from below the ceiling.
2GF1191-8BH Fixed Bracket
This bracket enables the Top Hat housing to be recessed in the ceiling or
recessed in a 2 foot drop ceiling tile. The bracket is mounted to the Top Hat and
installed in a hole cut in the ceiling. The bracket distributes the weight of the
dome and Top Hat housing across the T-bar framework of the ceiling. It is also
very useful for sheet rock, plaster, or solid ceilings.
2GF1191-8BG Adjustable Bracket
This bracket enables the Top Hat housing to be recessed in drop ceilings that
utilize other than 2 foot grids. The bracket distributes the weight of the dome and
the Top Hat housing across the T-bar framework of the ceiling.
Fig. 4 Indoor mounting structures (optional)
BE_CCDA1415-DN.doc
05.2004