Displaying Diagnostic Tests During Reset - Siemens CCDA1415-DN Instruction Manual

Configuring Text Displayed On-Screen
11.4

Displaying Diagnostic Tests During Reset

11.4.1 Changing the Display of Diagnostic Information
124
Siemens Building Technologies
Fire & Security Products
You can choose to have dome diagnostic tests run whenever the dome resets. The
diagnostic information displayed includes:
Communications Loopback Test
Camera Loopback Test
Motor Circuit Test.
If you do not want diagnostic information to appear when the dome resets, a
screen displaying the firmware version numbers for the Boot and Application code
and the maximum optical zoom for the dome appears.
If the diagnostic test function is activated, there may be a temporary loss of
IMPORTANT
communication in the network while the dome diagnostic tests are running.
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Diagnostic Display.
3. Change the setting.
If you want diagnostic tests to run when the dome resets, select On.
–
If you do not want diagnostic tests to run when the dome resets, select Off.
–
This choice displays the firmware versions whenever the dome resets.
The default setting is Off.
4. Select Exit. The Dome Configuration Menu appears.
BE_CCDA1415-DN.doc
05.2004