Displaying Or Hiding All Name Information - Siemens CCDA1415-DN Instruction Manual

11.3

Displaying or Hiding All Name Information

11.3.1 Changing the Display of All Name Information
Siemens Building Technologies
Fire & Security Products
The dome provides the ability to display the dome name, the area where the dome is
pointing, the name of the preset or pattern that is running, and alarm names. When the
display of camera or area names is enabled, the information appears on the screen
continuously. Preset, pattern, and alarm names appear only while they are active.
CAMERA NAME
PRESET NAME/PATTERN NAME
Fig. 42 Display Locations for Name Information
You may choose to disable displaying all name information, or you may choose to
display selected or all name information.
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Disable All Names?
3. Change the setting.
Select Yes to disable the appearance of all name information.
–
Select No to enable the appearance of all or some name information. Then
–
continue
The default setting is No.
4. Select Exit. The Dome Configuration Menu appears.
Configuring Text Displayed On-Screen
ALARM NAME
AREA NAME
123
BE_CCDA1415-DN.doc
05.2004