Update; Manual Update - ATCOM A10 User Manual

A10/A11/A10W/A11W IP Phone User Manual
(versus an internal extension). This is triggered by a "," character encountered in the dial plan.
4. Busy Tone：The promoting audio when a 486 RSC is received for an outbound call.
5. Reorder Tone ： The promoting audio when an outbound call failed or after the remote end
hangs up an established call.
6. Off Hook Warning Tone: The promoting audio when user does not put the handset on the
cradle properly.
7. Ring Back Tone：The promoting audio when the remote end is ringing.
8. MWI Dial Tone：The promoting audio when an unread voicemails existed.
9. Holding Tone：Indicate the local end that the current calling is hold by the remote end.
10. Conference Tone：The promoting audio to all parties when a 3 way conference is in progress.

4.6 Update

4.6.1 Manual Update

1. Firmware: Download firmware from ATCOM's webpage, then select firmware from your PC to
upgrade.
2. Configuration: Upload and download config.xml file.
Upload and download
3. Phone Book:
ATCOM TECHNOLOGY CO., LIMITED
phonebook.xml file
www.atcom.cn
37