A10/A11/A10W/A11W Quick Start Guide 1 Installation and access 1.1 Connection Set up A11(0)/A10W as below: 1.2 Installation instruction 1. Desktop installation A. Put the bottom side of the IP phone upside and press the plate into the slot, please refer the picture as below:...
Page 4
A10/A11/A10W/A11W Quick Start Guide B. Press the other plate into the slot according to the direction of the arrow C. It is the right picture after fixing the feet below: ATCOM TECHNOLOGY CO., LIMITED...
Page 5
A10/A11/A10W/A11W Quick Start Guide D. Disassemble the feet: Push the plate and pull the feet according to the direction of the arrow. When the plate is pulled out of the slot, you can take off the feet 2. Wall-hung Installation A.
Page 6
A10/A11/A10W/A11W Quick Start Guide B. Press the other side joints into the slot according to the direction of the arrow C. After install the wall-hung stand bracket, press one-side joints of stand bracket into the slot, please refer the picture as below:...
Page 7
A10/A11/A10W/A11W Quick Start Guide D. Press the other side joints into the slot according to the direction of the arrow E. Knock in nails or screws on the wall according to the proportion of the distance between the hanging holes as below:...
Page 8
A10/A11/A10W/A11W Quick Start Guide F. It is the right picture after fixing the stand bracket below: G. Disassemble the stand bracket: Push the spring joint of stand and pull the stand according to the direction of the arrow. ATCOM TECHNOLOGY CO., LIMITED...
A10/A11/A10W/A11W Quick Start Guide 2 Configuring phone A10/A11/A10W/A11W 2.1 Configuring via keypad Language Setting: The default language of the phone is English, it supports Chinese, Russian, Arabic, German, French, Portuguese, Turkish, Spanish, Hebrew, Hungarian, Italian. Press Menu- input default password 123- Preference- Language to edit the language list, choose the one you’d like to set on the phone.
There are 2 ways to connect to internet DHCP and Static , please choose one according to your own situation. Network mode: you can choose DHCP and Static. DHCP: A10/A11/A10W/A11W default to use DHCP to obtain IP from DHCP ATCOM TECHNOLOGY CO., LIMITED...
Page 12
SIP Server. Display Name: This name will display on the screen of A10/A11/A10W/A11W. It will display the name configured for the SIP account by the SIP server preferentially. It can also be kept blank. User ID: Username of SIP account.
A10/A11/A10W/A11W Quick Start Guide Authenticate ID: normally is the same with User ID, can also be kept blank if there is no special requirement from the SIP server. Password: Password of SIP account. Sip Server: SIP server address, support both IP address and domain name.
A10/A11/A10W/A11W Quick Start Guide 2.3.2 Configure the wifi on the WEB A10W connect to network via Wi-Fi acquiescently, click “Search Wi-Fi” button to search the available Wi-Fi. After all available Wi-Fi hotspots are list out, click the round behind the available Wi-Fi which you want to connect.