Function List; Av List - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
TV
Function list / AV list

Function list

The function list contains settings and additional options. The indi-
vidual list items will be briefly explained as follows:
The function list can be opened directly in TV mode or via the station
list. Depending on this, some list items may possibly not be available.
In TV mode:
MENU: Call function list.
9 ZDF HD
20:15 - 21:45
Toskana
Subtitles
Recording
Sound mode
Or:
OK Call station list,
call function list.
Mark function,
OK call.
Explanations of the symbols in the function list:
Open Expanded station list.
Call EPG (Electronic Programme Guide) wizard.
Menu item is only displayed as long as the EPG wizard has
not yet been executed.
Call up Language / sound. The sound formats on offer
and their designations depend on the programme being
broadcast.
Menu item will only be indicated when other languages/
sound tracks are available.
Call up selection of Subtitles.
Menu item will only be indicated when subtitles are
available.
Open recording dialogue to programme a Recording.
Set Sound mode (number of speakers).
Call up Sound settings.
Call up and adjust Headphone volume.
Menu item will only be indicated when a headphone is
connected to the TV set.
Call up Picture settings.
Activate PIP (picture in picture).
Move picture vertically up/down.
Switch screen off.
The menu item is only shown when DVB radio or an AV
source is active.
Here you can display your "Electronic Programme Guide".
Explanations of the symbols in the function list (continued):
Add current station as Favourite to Home view.
Changes the Sorting between numerically and alphabe-
tically.
Call up Edit station list.
Delete stations, shift stations, restore deleted stations.

AV list

Selecting the AV source via the AV list
In normal TV mode, without other displays:
Open up the station list AV list.
AV list 1 1 HDMI 1 HDMI 1
2 2 HDMI 2 HDMI 2
3 3 HDMI 3 HDMI 3
4 4 HDMI 4 HDMI 4
5 5 PC IN PC IN
6 AVS
Select desired connection,
OK switch over.
If the selected AV source provides a signal (picture), it
should be visible now.
For the VIDEO selection the set switches to cable
analog, channel E36. The TV set shows the signal of
a signal source device via antenna.
Only playback of the audio signal from the AV source (screen is off)
To play only the sound of a connected media player (e.g. MP3 player),
the AV sources can be selected so that the screen goes blank.
Switching off the screen reduces the power consumption of the
TV set.
Open up the station list AV list.
Select desired connection,
OK press at least for two seconds.
Selecting the AV source via the station list
In normal TV mode, without other displays:
OK call station list.
Call overview of station lists.
Mark AV list.
The AV list will be displayed.
Move to the AV list.
Mark desired AV source,
OK switch to AV source.
Note: If you press for
OK
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.
37