Loewe Connect ID 46 DR+ User Manual page 78

Hide thumbs Also See for Connect ID 46 DR+:
Table of Contents

Advertisement

Connect ID 40-55 DR+
User guide
Extras
Timer
Timer Services
This menu offers you convenient alarm services. Programmed alarms
are also active when the TV set has been switched off to standby.
If the TV set is switched on from the standby mode by alarm, a screen
message appears. If this is not confirmed within 5 minutes with the
OK key, the TV set switches automatically off again for safety reasons.
The TV set can also be switched off automatically at certain times. A
screen warning appears one minute before automatic switch off. The
automatic switch off can be interrupted by pressing any key.
Call Timer Services
Pressing long: Call up the timer.
Mark Timer Services.
Or:
HOME: Call Home view.
Mark Extras,
OK call Extras.
Mark Timer,
go to next column.
Mark Timer Services.
Timer
Timer Iist
Timer Services
Switch off once
Switch off daily
One-time alarm
Wake up Mon-Fri
Wake up Sat
Wake up Sun
Wake up with
Wake up signal volume
Adopt with
OK
Select the desired setting,
OK change.
OK adopt.
78
no
yes, at 23:59
no
yes, at 23:59
no
yes, at 23:59
no
yes, at 23:59
no
yes, at 23:59
no
yes, at 23:59
TV
Radio
Explanations of the setting options in the timer functions
menu:
Switch off
The set switches to the standby mode automatically
once
at the specified time.
If a time is specified which has already passed on
the same day, the set switches off at this time the
next day.
Switch off
The set switches to the standby mode automatically
daily
every day at the specified time.
One time
The set alerts you once today at the specified time.
alarm
If a time was specified which has already passed on
the same day, the alarm is saved for the next day.
Wake up
The set regularly alerts you from Monday to Friday
Mon-Fri
at the set time.
Wake up Sat The set alerts you regularly every Saturday at the
specified time.
Wake up Sun Explanations of setting possibilities in the Timer
functions menu.
Wake up with Specify whether the TV set switches on in the event
of an alarm from the standby mode in TV or Radio
Back
mode with the respectively last active station.
Wake up
Set the desired volume of the alarm tone. The alarm
signal
tone is emitted as a continuous tone as a guide
volume
during the setting.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect id 40 dr+Connect id 55 dr+

Table of Contents