Audio Playback From External Devices; Serial Interface Rs-232C (Rj12) - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
External devices

Audio playback from external devices

Connect external AV devices (e.g., MP3 player, DVD player) for sound
reproduction to the AV inputs of the TV set.
Connecting an external appliance (e.g. MP3 player)
Connect the output (jack receptacle) of the MP3 player via S-video
adaptor (1 (AVS) or the VGA adaptor
the TV set.
Plug the adaptor plug into the AVS socket of the TV set so that the ar-
row on the plug is visible.
TV set
Select AV input
The selection of the AV input for a device at the AVS socket (con-
nection as described above) is describe here as an example. The
procedure is similar to the selection of the other AV inputs.
HOME: Call Home view.
Mark Extras,
OK call Extras.
Mark AV list,
OK call AV selection.
AV list 1 1 HDMI 1 HDMI 1
2 2 HDMI 2 HDMI 2
3 3 HDMI 3 HDMI 3
4 4 HDMI 4 HDMI 4
5 5 PC IN PC IN
6 AVS
Mark desired AV source,
OK switch to AV source.
Start playback on the external device after selecting
the AV input.
Only playback of the audio signal from the AV source (screen
is off)
To play only the sound of a connected media player (e.g. MP3 player),
the AV sources can be selected so that the screen goes blank.
Switching off the screen reduces the power consumption of the
TV set.
Open the AV station list.
Select desired connection,
OK press at least for two seconds.
(1 Adaptor set is available as an accessory (see chapter Accessories).
(1 (PC IN) to the AVS socket of
MP3 player
AVS
AV adapter
Connection example of an MP3 player
Note: If you press
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.
Connecting an external digital sound device (e.g., CD player)
Connect the digital sound output (Cinch/RCA socket) of the player to
the SPDIF IN socket of the TV set.
CD player
DIGITAL AUDIO OUT
Playback from the device
Call AV list..
AV list
AV list AV list
Select SPDIF,
OK switch over..
for
OK
Start playback on the connected device.

Serial interface RS-232C (RJ12)

You can connect either the Loewe Individual Sound Projector ID or a
home network system of different manufacturers (e.g. AMX, Crestron)
to your TV set via the RS-232C (RJ12) interface.
As to the configuration of the RS-232C (RJ12) interface and for further
information on the various home networking systems contact your
dealer please.
TV set
SPDIF
IN
9 SPDIF
7 7 PC IN PC IN
8 8 VIDEO VIDEO
9 9 SPDIF SPDIF
Note: If you press for
Note: If you press Note: If you press for for
OK
OK
at least two seconds to
at least two seconds to at least two seconds to
switch to the selected switch to the selected switch to the selected
channel, the screen
channel, the screen channel, the screen
switches off and you will
switches off and you will switches off and you will
only hear the sound. only hear the sound. only hear the sound.
With the button
With the button With the button
(green), you can switch
(green), you can switch (green), you can switch
the screen back on and the screen back on and the screen back on and
off.
off. off.
131