Network Settings - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
System settings
Multimedia / Network

Network settings

Under Network settings you make settings to your network adaptors
and the various types of media.
Call network settings
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Multimedia / Network,
go to next column.
Mark Network settings,
go to next column.
... Network Networking
settings
Host name
Proxy server
Wake on
LAN/WiFi
Select desired menu item,
go to next column.
Explanations of the setting options in the network menu:
Networking Here, the network wizard starts that guides you
through all necessary settings to your network (see
right hand column).
Reset to Here, all network settings are reset to factory de-
factory faults.
settings
Host name Give your TV set a name so that it can be uniquely
identified in the network.
Proxy server Do the settings for using a proxy server. The proxy
server wizard will be called.
Wake on If you allow Switch on via LAN/WLAN, the TV set can
LAN/WiFi be switched on via the network when it is in standby.
Thus, energy consumption of the TV set will incre-
ase when it is in standby mode!
112
The following antenna wizard guides you through all the
necessary settings relevant to your network.
Network
The Network wizard will be started. You see the current network status.
Change network settings.
Network selection
Select network mode
... Networking
Please select the desired network mode from the list or switch it off completely.
Note:
The "bridge function" allows additional network-compatible devices (e.g. LOEWE Blu-ray
Player) to be connected to the TV's network socket without their own network access, in
order to also use the TV's wireless network connection.
Note: The newly selected parameter must be confirmed with the
off
On, wired only
On, wireless only
On, wireless + bridge function
Back with
Select network access.
Explanations of the setting options:
Off deactivates all existing network adaptors of your
TV set.
On, Access to the network only via a network cable. The
wired only wireless access is deactivated.
The network wizard will be opened.
On, Access to the network only via WLAN. The access
wireless only via a network cable is deactivated.
The network wizard will be opened.
On, wireless Both network adaptors are activated. Wireless Inter-
+ bridge net access is possible (WLAN).
function
Internet-enabled devices connected to the network
socket (LAN) (e.g., Loewe MediaCenter, Loewe
BluTechVision 3D) can use the wireless connection
of the TV set to access the Internet via the WLAN
bridge function.
The network wizard will be opened.
Under no circumstances may the TV set be
wired and at the same time connected by a
wireless connection to the same network, e.g.
router.
This may cause severe operational faults!
OK proceed.
.
button.