Record; Web Key Function - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
System settings
Control

Record

You can set a pre-record and post-record time for timer recordings
made without auto time control. This minimizes the risk that a part
of the broadcast is not recorded due to the broadcast starting earlier
and/or finishing later.
Call Recording settings
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark more ...,
call other settings.
Mark Recording,
go to next column.
Recording
... Recording
Pre-record time
Post-record-time
Here you can enter a time span specifiying how long before the scheduled time your programmed recording should
start so that programmes which begin too early are recorded in full.
Select Pre-record time or post-record time.
Mark the desired duration of the pre-record
time or of the post-record time.
Factory setting: pre-record time: 1 min,
110
0 min 1 min 0 min 1 min 2 min 3 min 4 min 5 min 6 min 7 min 8 min 2 min 3 min 4 min 5 min 6 min 7 min 8 min
0 min 1 min 2 min 3 min 4 min 0 min 1 min 2 min 3 min 4 min 5 min 6 min 7 min 8 min 5 min 6 min 7 min 8 min
post-record time: 5 min.

WEB key function

You can assign the Web key on the remote control unit a particular
function.
The selected function will then be called directly when the key is
pressed.
Call WEB key settings
Default setting: MediaNet
HOME: Call Home view.
OK call System settings.
Mark Control,
go to next column.
Mark more ...,
call other settings.
Mark
go to next column.
Back
... key
WEB
function
Select function.
Mark System settings,
key function,
You can assign the button another function here. The
WEB
selected function is then accessed directly when the button
is pressed.
Sound/pic-
ture music
Sound
mode
Picture for-
mat
Headphone
volume
3D
Internet ra-
dio
Photo
Video