Manual Update Via The Internet - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
System settings
Control

Manual update via the Internet

If an Internet connection is available, new software can be downloaded
directly and installed onto the TV set.
Calling Software update
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Software,
go to next column.
Mark Software update,
go to next column.
Mark Via Internet,
go to next column.
You will see a message on the screen regarding
data protection.
SOFTWARE UPDATE WIZARD - Data protection
In accordance with the local laws and regulations, we point out that machine
... Start update
numbers and the installation site of your TV set , as well as the current updates
and the current software status in each case, are processed and saved by a
computer system if you use the
we are always able to provide you with optimal service. All data are handled
in confidence.
If you do not wish this to be the case, please press the
Proceed with
If you are not in agreement with the relevant data being
passed on:
BACK: Exit the update process.
The update will then not be carried out.
Otherwise: Confirm data protection message by press-
ing
The version of the software package that is currently
installed will be displayed.
SOFTWARE UPDATE WIZARD - Current software
Current software: 2.1.0.0
Start update
... ...
To load a new piece of software, you first need to search for said software on the
update server. Press the
Back with
Proceed.
The TV set connects to the Internet and scans
the update server for new software.
If a new software version is available after the search, an
on-screen message appears (see right hand column).
If no new software package was found in the search:
BACK: End of wizard.
button to confirm. The data guarantee that
button.
End with
.
key to start the search.
Proceed with
New software package found
New software
A new software version was found. A new software version was found.
... ... Start update
New software: V2.3.14.0 (Current software: V.2.1.25.0) New software: V2.3.14.0 (Current software: V.2.1.25.0)
If you now wish to load the new software, press the If you now wish to load the new software, press the
close with the close with the
Ensure that the TV set is not switched off at the mains while it is loading the Ensure that the TV set is not switched off at the mains while it is loading the
data. data.
Proceed with Proceed with
Proceed starts loading of the new software.
Or:
BACK: End of wizard.
The update will then not be carried out.
Load new software package
Only the parts of the software package that are not up
to date will be automatically downloaded from the
Internet and updated.
Each part of the software is downloaded individually
from the Internet and is then programmed.
The total time required for all the software parts to be
downloaded from the Internet is dependent on the
speed of data transfer that is being used.
The total programming process can take up to 50
minutes in total.
Please do not switch off your TV set with the mains
switch during the entire loading and programming
process.
Updating software
The "V2.3.14.0" software is currently being programmed, please wait ...
... ... Start update
Note: The loading and programming process can take up to approx. 50 minutes Note: The loading and programming process can take up to approx. 50 minutes
in total. Please do not switch off your TV set at the mains during this time. in total. Please do not switch off your TV set at the mains during this time.
You will be informed once the loading and programming
process is complete.
To make your TV set completely ready for use again,
please turn it off and on again at the mains.
button. Otherwise button. Otherwise
button. button.
End with End with
60%
101