Table of Contents
Advertisement
This CEECO Model Telephone can be programmed remotely to change all
programming features previously discussed. In addition, the security code for
remote programming can be changed as well. No changes to the mini-jumpers are
required to remotely program the telephone. The following steps show how to
remotely program this CEECO telephone:
Place a call from another telephone to the CEECO telephone. The CEECO
telephone will automatically answer itself after the number of rings selected in
section 3.12. The CEECO telephone then sends two tones as a prompt for the
security code.
From the calling telephone, dial # #, followed by the security code. The
CEECO
telephone will send another tone to acknowledge access to remote programming.
The CEECO telephone is now ready to be remotely programmed. Follow the
instructions previously discussed under sections 3.06 through 3.10, utilizing the
keypad from the calling phone. No other steps need to be followed. When
finished, enter # 9 9. The CEECO telephone will hang-up to end the remote
programming session.
NOTE: As an added security measure, any failed or repeated attempts at remote
programming of the CEECO telephone must be followed by a full two minute
pause or rest, before additional attempts are made.
3.9
REMOTE MONITORING
This CEECO Model Telephone can remotely monitor the area in which it has
been installed by using another telephone. Simply follow the steps of the next
sections:
Place a call to the CEECO telephone from another phone. The CEECO
telephone will answer itself after the number of rings programmed in section
3.12. The CEECO telephone sends out two tones as a prompt for the next step.
Using the calling telephone, dial # * which will turn on the microphone for
remote monitoring of the area of the CEECO telephone.
Dial # to end the monitoring mode and the CEECO phone will hang up.
3.10
When programming is finished, return the mini-jumpers to the
"OFF" position. Then return the phone to an "on hook" state (no dial tone), by
pressing the black "CALL " button.
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
ISSUE 4.0
13
Advertisement
Table of Contents
