Advertisement
Quick Links
WPP-531-D2-ADA-VA-R-SB24VDC-SPK1.07UNVLr1-ISSUE4.0
SERVICE MANUAL
FOR
MODEL
WPP-531-D2-ADA-VA-R-SB24VDC
WEATHERPROOF TELEPHONE WITH OPTIONAL STEADY
BURNING BLUE LIGHT FEATURE
SECOND NUMBER AUTO-DIAL
VOICE ANNOUNCEMENT
EQUIPPED WITH SPK1.07UNVLr3 FIRMWARE
RED HOUSING & EMERGENCY BUTTON
Serving the Telephone Industry Since 1930
Communication Equipment
519 West South Park Street
& Engineering Company
Okeechobee, FL 34972
Voice: 863-357-0798
Fax: 863-357-0006
Advertisement
Related Manuals for CEECO WPP-531-D2-ADA-VA-R-SB24VDC
Summary of Contents for CEECO WPP-531-D2-ADA-VA-R-SB24VDC
- Page 1 WPP-531-D2-ADA-VA-R-SB24VDC-SPK1.07UNVLr1-ISSUE4.0 SERVICE MANUAL MODEL WPP-531-D2-ADA-VA-R-SB24VDC WEATHERPROOF TELEPHONE WITH OPTIONAL STEADY BURNING BLUE LIGHT FEATURE SECOND NUMBER AUTO-DIAL VOICE ANNOUNCEMENT EQUIPPED WITH SPK1.07UNVLr3 FIRMWARE RED HOUSING & EMERGENCY BUTTON Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street &...
-
Page 2: Important Information
Issue 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL WPP-531-D2-ADA-VA-R-SB24VDC, EQUIPPED WITH SPK1.07UNVLr3 FIRMWARE. SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support. -
Page 3: Table Of Contents
TESTING/OPERATION ......................9 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ....10 INSTALLATION CONTINUED… .................11 SPECIFICATIONS ........................12 PARTS LIST ............................13 FCC NOTICE ..........................14 REPAIR AND RETURN INFORMATION .............15 10.0 WARRANTY POLICY ......................16 11.0 PROGRAMMING JUMPER DIAGRAM ..............17 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
(863) 357-0006 Fax GENERAL DESCRIPTION 2.01 The CEECO Model WPP-531-D2-ADA-VA-R-SB24VDC Telephone is a sturdy, hands free, vandal resistant, speakerphone. The telephone is constructed with a stainless steel panel and an aluminum weatherproof housing. This telephone comes with an optional ADA feature (red/green LED) giving visual feedback during periods of operation. -
Page 5: Programming
NOTE: Once the # key has been entered, an operator reorder signal, fast busy tone or other central office signals may be heard. Please disregard these sounds and continue programming, as they will have no affect on the programming. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 6: Programming Continued
555-1212, whenever the RED Button is pressed. Enter # 0 1 5 8 7 5 4 3 0. This will program the phone to automatically dial number 587-5430 if number 555-1212 does not answer. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Programming Continued
1 Dial PBX access number stored in Location #18. Digit 9: 0 Always 0 for this model. Digit 10: 0 No Wink Detect. 1-9 Wink Detect (l = 50ms incremental to 450ms, 5 = 250ms recommended). CEECO Communication Equipment & Engineering Company PROPRIETARY... - Page 8 • Refer to the diagram on page 23 to locate the Voice Record Switch on the printed circuit board. Toggle the record switch to the ON position. The phone's LED will turn red. CEECO Communication Equipment & Engineering Company PROPRIETARY...
-
Page 9: Testing/Operation
Secure it in place using the four (4) security screws and security tool. If the telephone has not yet been installed at its intended location, please refer to section 7.0, before performing this step. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Installation Notes And Assembly Instructions
5.03 Run the inside station wire into the enclosure and terminate on the RJ11C modular jack inside, as depicted on the following page. The CEECO-provided jack must be used as it contains required over-voltage protection. Mount the housing in the intended location using the four mounting holes provided. There is a pole-mounting bracket available, which is sold separately. -
Page 11: Installation Continued
5.07 Carefully return the telephone assembly to the housing, securing it in place with the four (4) security screws and security tool. 5.08 Telephone line wiring for modular jack: CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 12: Specifications
20% - 90% non condensating PROGRAMMING: Via DTMF keypad or remotely thru phone line. WEIGHT: Approximately 16 Pounds DIMENSIONS: 9" Wide x 13" High x 8.5" Deep TYPE JACK: RJ11C FCC REGISTRATION BW8USA-73021-MT-E CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 13: Parts List
QUANTITY PART NUMBER DESCRIPTION 331-006 OUTER COVER SECURITY SCREW 301-018 MODULAR LINE CORD 301-054UL MODULAR CONNECTOR (RJ11C) 700-008 KEYPAD CABLE 660-000 CEECO SPEAKER BOARD 705-110 CONNECTORIZED KEYPAD 6020 MOMENTARY PANEL SWITCH 14123 SPEAKER 14067 MICROPHONE 331-005 WEATHERPROOF HOUSING 331-024B STEADY BURNING BLUE LIGHT... -
Page 14: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in Section 8.0. The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 15: Repair And Return Information
(863) 357-0798 (863) 357-0006 9.03 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge, plus parts. The customer must pay the shipping costs in both directions. 9.04 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer’s list price. -
Page 16: 10.0 Warranty Policy
Printed circuit boards should not be repaired in the field. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty. -
Page 17: Programming Jumper Diagram
ON position BEFORE going off-hook. When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position; this will decrease battery life. CEECO Communication Equipment & Engineering Company PROPRIETARY...