CEECO WPP-333-F-M-IVC Service Manual

Weatherproof telephone

Advertisement

Quick Links

SERVICE MANUAL
WPP-333-F-M-IVC
WEATHERPROOF TELEPHONE
HOB-333-F-M-IVC
WEATHER-RESISTANT TELEPHONE
STAINLESS STEEL PANEL TELEPHONE
EQUIPPED WITH CAC6.00 SOFTWARE
RECEIVER-OPERATED MAGNETIC HOOK SWITCH
BACKGROUND NOISE REDUCTION
Communication Equipment
& Engineering Company
WPP(HOB)-333-F OR SSP-313-F-M-IVCCAC6.00-650-521-ISSUE4.0
FOR
MODEL
SSP-313-F-M-IVC
VOLUME CONTROL
Serving the Telephone Industry Since 1930
519 West South Park Street
Okeechobee, Florida 34972
Voice: 863-357-0798
Fax: 863-357-0006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WPP-333-F-M-IVC and is the answer not in the manual?

Questions and answers

Summary of Contents for CEECO WPP-333-F-M-IVC

  • Page 1 WPP(HOB)-333-F OR SSP-313-F-M-IVCCAC6.00-650-521-ISSUE4.0 SERVICE MANUAL MODEL WPP-333-F-M-IVC WEATHERPROOF TELEPHONE HOB-333-F-M-IVC WEATHER-RESISTANT TELEPHONE SSP-313-F-M-IVC STAINLESS STEEL PANEL TELEPHONE EQUIPPED WITH CAC6.00 SOFTWARE RECEIVER-OPERATED MAGNETIC HOOK SWITCH BACKGROUND NOISE REDUCTION VOLUME CONTROL Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street &...
  • Page 2 ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL WPP-333-F-M-IVC OR MODEL NUMBER HOB-333-F-M-IVC OR SSP-313-F-M-IVC EQUIPPED WITH CAC6.00 FIRMWARE SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
  • Page 3: Table Of Contents

    RECOMMENDED TOOLS AND TEST EQUIPMENT ........11 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ....13 SPECIFICATIONS....................14 PARTS LIST ......................15 FCC NOTICE......................16 10.0 REPAIR AND RETURN INFORMATION ............17 11.0 WARRANTY POLICY ..................18 12.0 DIAGRAM......................19 CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 4: Introduction

    INTRODUCTION The practices in this manual provide installation and maintenance information for CEECO Model Telephones noted on the front cover. The information in this manual is subject to change without notification. For information not included in this manual, please call or write:...
  • Page 5: Programming

    Example: Entering #00 followed by 101003 would program the phone to have no call restrictions, no incoming call allowed, a wide dial tone detect window, a muted microphone initially, DTMF dialing, and a 5 minute automatic timed call disconnect. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 6: Programming Continued

    9=30 min.call timeout  Be sure to record your selections in the table below for future reference. Telephone Options Table: #00 __ __ __ __ __ __ 1 2 3 4 5 6 CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 7: Programming Continued

    #31 is dialed, and 583-9907 when #32 is dialed. Please note that, when the phone is put into operation, the # key must be dialed preceding the two digit location number, in order to release the speed dial number. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 8: Programming Continued

    #48 __ __ __ __ __ __ __ __ __ __ __ #68 __ __ __ __ __ __ __ __ __ __ __ #49 __ __ __ __ __ __ __ __ __ __ __ #69 __ __ __ __ __ __ __ __ __ __ __ CEECO Communication Equipment & Engineering Company...
  • Page 9: Programming Continued

    Programming is now completed. Hang up the phone and return the mini- jumpers to the “OFF” position, as depicted on the last page of this manual. The phone is now ready for Testing/Operation. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 10: Testing/Operation

    The microphone will be muted. The Phone will then sound an error tone after approximately four seconds and reset itself. If this does not solve the problem, please refer to section 10.2. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 11: Testing/Operation Continued

    DTMF Test Set Volt/Ohm Meter 1/4" Nut Driver Flat Blade Screw Driver Security Tool 301-037 *The security tool is for a standard 5/32" button head screw generally used on the framework of the phone booths. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 12 C. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface D. Use caution when installing or modifying telephone lines. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 13: Installation Notes And Assembly Instructions

    Plug the modular line cord from the cover assembly into the RJ11C terminal block. 6.10 Dress the line cable away from the security screws. Install the faceplate into the housing and secure it by tightening the security screws. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 14: Specifications

    9 1/2" Wide x 12 5/8" High x 8" Deep (Including door). MOUNTING: 4 Holes spaced 8" x 5 7/8" x 13/32" WEIGHT: 12 Pounds MEMORY RETENTION: Lithium Battery - Long Life FCC REGISTRATION: BW88T7-13823-TE-T TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 15: Parts List

    Modular Jack 301-018 30" Modular Cord 650-570 Network Cable 301-016 Security screw 331-005 BLACK weatherproof housing (WPP model) 331-HOB BLACK open face housing (HOB model) Accessories: 301-064 Security tool 301-016 Spring Loaded Door Option CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 16: Fcc Notice

    FCC registration number and ringer equivalence number. These numbers are listed in section 9.00. The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY...
  • Page 17: Repair And Return Information

    Okeechobee, Florida 34972 (863) 357-0798 10.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs both directions. 10.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer’s list price.
  • Page 18: Warranty Policy

    This warranty is limited to the value of material only. CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse and improper use or improper installation.
  • Page 19: Diagram

    POSITION BEFORE GOING OFF HOOK When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position, this will decrease battery life. CEECO Communication Equipment & Engineering Company PROPRIETARY...

This manual is also suitable for:

Hob-333-f-m-ivcSsp-313-f-m-ivc

Table of Contents