Filter Holder Assy Removal; Filter Holder Disassembly - Eiki LC-HDT1000 Service Manual

Mechanical Disassembly

5 Filter holder assy removal

1 Pull the filter cartridge upward off.
2 Remove 4 screws-A (T4x10) and 1 screw-B(M4x10), and then remove the filter holder
assy upward off.

5-1 Filter holder disassembly

1 Remove 1 screw-A (T3x14) and remove the wind sensor (S901).
2 Remove 2 screws-B (T3x8) and remove the filter switch board.
3 Remove 3 screws-C (T3x8) and remove the filter motor assy.
4 Remove 3 screws-D (T3x8) and remove the AMF board.
Filter SW board
a
a
a
a
B
c
c
c
B
B
-27-
Filter cartridge
Filter holder assy
Filter holder
Wind sensor (S901)
AMF driver board
a
d
d
d
Filter motor assy