Mechanical Disassembly
10 Lens shift assy removal
(Before disassembling, make sure the lens should be adjusted to the center position.)
1 Remove 4 screws-A(T4x14) and 4 screws-B(M4x12) and remove the lens shift assy
upward off.
B
B
10-1 Lens shift assy disassembly
1 Remove the motors.
2 Remove the lens position detection switches.
3 Remove the Lens Base Net board.
Lens Shift Motor (U/D)
Lens Base Net Board
a
a
a
a
B
B
Cord
Lens shift assy
Lens Shift Motor (L/R)
Sensor Switch X
-34-
Sensor Switch Y