Eiki LC-HDT1000 Service Manual page 58

Optical Adjustment
v integrator adjustment-2
1
Move the Integrator-out and Integrator-in to remove the color bands
on the top/bottom or left/right of the screen.
1) To adjust the image vertically as shown in Fig.4-1, loosen 2
a
screws , and turn the screws
2) To adjust the image horizontally as shown in Fig.4-2, loosen 2
c
screws , and move the slot
2
a
Tighten screws and
unit.
B
A
Fig.4-1
after completing the optical center adjustment, replace the optical adjustment tools with the polarized
glass/optical filter assy and connect the Lcd panel cables and connectors on the main board.
B
by using hex drivers.
d
by using a slot screwdriver.
c
to fix the Integrator-out and Integrator-in
(Target screen image)
C
-58-
D
Fig.4-2