Capillary Flow Technology Supplies - Agilent Technologies gc/ms series Maintenance Manual

Capillary Flow fittings
54 Order online at www.agilent.com/chem/store

Capillary Flow Technology Supplies

Agilent offers a family of GC accessories based on our proprietary Capillary Flow
technology. These accessories increase system productivity and performance:
• QuickSwap MSD interface provides vent-free removal of columns.
• Deans Switch device simplifies the analysis of complex samples.
• Purged Effluent Splitter for inert, leak-free column effluent splitting.
Fittings, Ferrules and Supplies
For leak-free, low dead volume and inert column connections with capillary flow
accessories, such as the Deans Switch or QuickSwap MSD Interface, use only Siltite
ferrules and specified nuts. For Capillary Flow devices, use deactivated fused silica
tubing. Do not use tubing that has been coated with stationary phase.
Fittings, Ferrules and Supplies
Description
Internal nut
Swaging nut
Column storage fitting
Fused silica, deactivated, 0.15 mm x 1 m
Fused silica, deactivated, 0.15 mm x 5 m
Fused silica, deactivated, 0.15 mm x 10 m
SilTite Metal Ferrules, 0.10-0.25 mm ID capillary columns
SilTite Metal Ferrules, 0.32 mm ID capillary columns
SilTite Metal Ferrules, 0.53 mm ID capillary columns
Part No.
G2855-20530
G2855-20555
G2855-20590
160-2625-1
160-2625-5
160-2625-10
5188-5361
5188-5362
5188-5363