Troubleshooting And Tips; Power-On Indicator Remains Dark - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

7

Troubleshooting and tips

V
CAUTION!
Follow the safety instructions in the "Safety notes and other important
information" manual and in chapter
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê Switch off the server.
Ê Contact the Fujitsu Technology Solutions customer service team.
7.1

Power-on indicator remains dark

The power-on indicator remains dark after you switch on your device.
Power cords connected incorrectly
Ê Make sure that the power cord is correctly connected to the server and the
grounded power outlet. For further information, refer to
the server to the mains" on page
Power supply overloaded
Ê Disconnect the server power plug from the grounded power outlet.
Ê Wait a few seconds before you reconnect the power plug to the grounded
power outlet.
Ê Switch on your server.
TX100 S2 Core Edition
"Important notes" on page
40.
Operating Manual
23.
section "Connecting
79