Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual page 39

The corresponding indicators are explained in section
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê Connect the devices.
Two additional USB ports are located on the front of the server (see figure
page 43).
I
If components with large power requirements (e.g. external USB hard
disk drives) are connected simultaneously, these USB connectors may
be switched off.
TX100 S2 Core Edition
Operating Manual
Installing the hardware
"Server rear" on page 45.
4 on
39