Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual page 25

V
CAUTION!
Never connect or disconnect data transmission lines during a storm
(risk of lightning strike).
Make sure that no objects (e.g. jewelery, paperclips etc.) or liquids
can get inside the server (risk of electric shock, short circuit).
In emergencies (e.g. damaged casing, controls or power cords,
penetration of liquids or foreign bodies), switch off the server
immediately, remove all power plugs and contact your sales outlet or
customer service team.
Proper operation of the system (in accordance with
IEC 60950-1/EN 60950-1) is only ensured if the casing is completely
assembled and the rear covers for the installation slots have been
fitted (electric shock, cooling, fire protection, interference
suppression).
Only install system expansions that satisfy the requirements and
rules governing safety and electromagnetic compatibility and those
relating to telecommunication terminals. If you install other
expansions, they may damage the system or violate the safety
regulations. Information on which system expansions are approved
for installation can be obtained from our customer service center or
your sales outlet.
The components marked with a warning notice (e.g. lightning symbol)
may only be opened, removed or exchanged by authorized, qualified
personnel. Exception: hot-pluggable power supply units can be
replaced.
The warranty is void if the server is damaged during installation or
replacement of system expansions.
Batteries
V
CAUTION!
Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see the technical manual for the
system board).
Do not throw batteries into the trash can.
TX100 S2 Core Edition
Operating Manual
Important notes
25