Cleaning The Server - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

5.8

Cleaning the server

V
CAUTION!
– Switch the server off and disconnect the power plugs from the
properly grounded power outlets.
– Do not clean any interior parts yourself; leave this job to a service
technician.
– Do not use any cleaning agents that contain abrasives or may
corrode plastic.
– Ensure that no liquid enters the system. Ensure that the ventilation
areas of the server are clear.
– Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Wipe the server with a dry cloth. If particularly dirty, use a cloth that has been
moistened in a mild domestic detergent and then carefully wrung out.
TX100 S2 Core Edition
Operating Manual
Installation and operation
75