Installation Steps, Overview - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

2

Installation steps, overview

This chapter contains an overview of the steps you need to carry out to install
your server. Links take you to sections where you can find more detailed
information about the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Set up the server (see section
Ê Wire the server. Follow the instructions in sections
the server" on page 38
page 41.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
Ê Configure your server as described in section
TX100 S2 Core Edition
"Important notes" on page
"Unpacking the server" on page
12); print out the PDF files if required.
"Setting up the server" on page
and "Notes on connecting/disconnecting cables" on
40).
"Indicators and controls" on page
Operating Manual
23.
36).
"Documentation
37).
"Connecting devices to
"Connecting the server to the
43).
"Initial operation" on page 47.
21