Energy Star; Transporting The Server - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

3.4

ENERGY STAR

In typical configurations the PRIMERGY TX100 S2 satisfies the
stringent requirements of the Ecolabel Energy Star for
Computers Version 5.0. These requirements ensure energy
savings when computers are being used and performing a range
of tasks, as well as when they are turned off or into a low power
mode. For example, the power consumption of the PRIMERGY
TX100 S2 in the operation mode "idle" is less than 65 W.
Products that have been certified compliant with ENERGY STAR
and identified as such are in full compliance with the specification
at shipping. Note that energy consumption can be affected by
software that is installed or any changes that are made to the
BIOS or energy options subsequently. In such cases, the
properties guaranteed by ENERGY STAR can no longer be
assured.
The "ServerView Operations Manager" user guide contains
instructions for reading out measurement values, including those
relating to current energy consumption and air temperatures.
Either the Performance Monitor or the Task Manager can be used
to read out CPU utilization levels.
3.5

Transporting the server

V
CAUTION!
Only transport the server in its original packaging or in packaging that
protects it from impacts and jolts. Do not unpack the server until it is at
its installation location.
If you need to lift or transport the server, ask other people to help you.
TX100 S2 Core Edition
Operating Manual
Important notes
31