Danfoss AK-SM 350 Manual page 52

user and operator safety
This unit is safe to operate as long as the instructions in this
manual are followed. There is live voltage under the cover, so the
cover should not be removed as long as the supply voltage is
connected.
Check that the supply voltage is turned off before the cover is
removed. The operator of this system is expected to know how
to use this unit. Danfoss is not responsible for any loss or damage
caused by incorrect operation of the unit.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
52 Manual RS8EF402 © Danfoss 02-2009
Validity
This manual was prepared in December 2008 and is valid for the
AK-SM 350 with software version 1.7x.
The manual describes the setup and employment of the AK-SM
350 when it is used for monitoring and controlling refrigeration
installations.
AK-SM 350 Version 1.7x