Installing A Ris Image Onto A Client Workstation - Sun Microsystems Ultra 40 M2 Operating System Installation Manual

7. The txtsetup.oem file is located in the following directory.
ris_partition:\RemoteInstall\Setup\English\Images\image_dir\$oem$\
textmode\
Add a semicolon to the beginning of each line for files that are of type *.dll in the
[Files.scsi.RAIDClASS] and [Files.scsi.BUSDRV] sections.
8. To enable the RIS server to distribute the RIS image you created, type the
following commands:
c:\ net Stop binlsvc
c:\ net Start binlsvc
Installing a RIS Image onto a Client
Workstation
This section describes how to install a RIS image onto a client workstation using PXE
boot.
To install a RIS image onto a client workstation:
1. Power on or reboot the workstation.
2. During POST, press the F12 key to enter PXE.
The workstation looks for the RIS server on the network.
3. Type your name and password when the Windows RIS install screen appears.
4. Choose the RIS image to install.
Once selected, the OS installation begins and automatically continues until it
completes.
28 Sun Ultra 40 M2 Workstation Operating System Installation Guide • November 2006