Adding The Nvida Ethernet Drivers To The Windows Image - Sun Microsystems Ultra 40 M2 Operating System Installation Manual

6. In the Installation Source Files Location screen, choose the CDROM drive with
the Windows XP SP2 32-bit CD, and then click Next.
7. In the Windows Installation Image Folder Name screen, type a descriptive name
for the Windows XP SP2 32-bit CD image you are creating. For example:
Ultra_40_Windows_XP_SP2_32-bit
8. Click Next.
9. In the Friendly Description and Help Text screen, type a description and help text
(for future end-user reference), and then click Next.
10. In the Previous Client Installation Screens Found screen, choose "Use the old
client installation screens, and then click Next.
11. In the Review Settings screen, verify your settings, and then click Finished.
12. After the image installs to the server, click Done.
Adding the NVIDA Ethernet Drivers to the
Windows Image
To add the NVIDIA Ethernet drivers to the Windows XP SP2 32-bit CD image on the
RIS server:
1. Insert the Tools and Drivers CD into the RIS server's CDROM drive.
2. Type the commands below to accomplish the following actions:
Copy the Windows XP SP2 32-bit RIS NVIDIA Ethernet driver zip package to the
■
RIS server.
Unzip the Ethernet driver zip package.
■
Copy the files to the Windows XP image.
■
copy cdrom_drive:\drivers\windows\RIS\XP32\NVRIS.ZIP C:\temp\
c:\
c:\ unzip c:\temp\nvris.zip -d c:\temp\nvris
copy c:\temp\nvris\*.* ris_partition:\RemoteInstall\Setup\English\Images\image_dir\
c:\
i386
Where cdrom_drive is the CDROM drive on the RIS server, image_dir is the image
directory, and ris_partition is the drive where the RIS image is stored on the RIS
server.
20 Sun Ultra 40 M2 Workstation Operating System Installation Guide • November 2006