Installing Windows Xp Operating System Drivers - Sun Microsystems Ultra 40 M2 Operating System Installation Manual

5. Eject the CD.
6. Reboot the server.
7. When prompted for networking information on your system, enter the
networking information for your server.

Installing Windows XP Operating System Drivers

The Sun Ultra 40 M2 Workstation Tools and Drivers CD contains NVRAID, NVIDIA
display, and NVIDIA chipset drivers for Windows XP. If you are installing NVRAID
drivers, you will need to use the XpReburn script to create a new Windows XP CD
containing the necessary drivers or create a boot diskette to install the drivers before
installing the Windows XP operating system.
The order of Windows XP driver installation is as follows:
1. If you plan to use the workstation RAID functionality, install the NVRAID drivers
before installing the operating system by using one of the following methods:
■
■
2. Install the operating system.
3. Using the Tools and Drivers CD, install the display and chipset drivers as
described in
on page
4. If necessary, install the Infineon TPM and RealTek audio drivers as described in
"Installing Infineon TPM and RealTek Audio Drivers" on page
5. If necessary, enable SLI support. See
Note – The Tools and Drivers CD does not mount the diagnostic partition for
Windows XP software.
12 Sun Ultra 40 M2 Workstation Operating System Installation Guide • November 2006
"Installing RAID Drivers Using the XPReburn Script" on page
"Installing RAID Drivers Using a Boot Diskette" on page
"Installing NVIDIA Display and Chipset Drivers for Windows XP"
16.
"Configuring SLI Support" on page
13.
14.
17.
29.