Enabling SLI for Linux
To enable SLI for Linux operating systems:
1. Log in to the workstation as root (superuser).
2. Install the Linux display drivers, if you have not already done so.
See
"Installing Linux Operating System Drivers" on page
3. Type the command:
# nvidia-xconfig --sli=on
This will modify the X configuration file automatically
4. Reboot the workstation.
Refer to the readme for more information on configuring the different operation
modes in either of the following locations:
On the hard drive after the display drivers are installed:
■
/usr/share/doc/NVIDIA_GLX-1.0/readme.txt
On the Tools and Drivers CD at: /drivers/linux/OS/display/readme.txt.
■
Where OS is red_hat or suse.
30
Sun Ultra 40 M2 Workstation Operating System Installation Guide • November 2006
10.