Keyboard Conventions; How To Send Your Comments - IBM System Storage N3700 Hardware And Service Manual

Keyboard conventions

This guide uses capitalization and some abbreviations to refer to the keys on the
keyboard. The keys on your keyboard might not be labeled exactly as they are in
this guide.

How to send your comments

Your feedback is important in helping us to provide the most accurate and
high-quality information. If you have comments or suggestions for improving this
publication, you can send us comments electronically by using these addresses:
v Internet: starpubs@us.ibm.com
v IBMLink
v IBMLink from Canada: STARPUBS at TORIBM
v IBM Mail Exchange: USIB3WD at IBMMAIL
You can also mail your comments by using the Reader Comment Form in the back
of this manual or direct your mail to:
Formatting convention
Italic type
Monospaced font
Bold monospaced font
What is in this guide...
hyphen (-)
Enter
type
enter
™
from U.S.A.: STARPUBS at SJEVM5
Type of information
v Words or characters that require special
attention.
v Placeholders for information you must
supply. For example, if the guide requires
you to enter the fctest adaptername
command, you enter the characters
"fctest" followed by the actual name of the
adapter.
v Book titles in cross-references.
v Command and daemon names.
v Information displayed on the system
console or other computer monitors.
v The contents of files.
Words or characters you type. What you type
is always shown in lowercase letters, unless
your program is case-sensitive and
uppercase letters are necessary for it to work
properly.
What it means...
Used to separate individual keys. For
example, Ctrl-D means holding down the Ctrl
key while pressing the D key.
Used to refer to the key that generates a
carriage return, although the key is named
Return on some keyboards.
Used to mean pressing one or more keys on
the keyboard.
Used to mean pressing one or more keys
and then pressing the Enter key.
About this document
xxiii