Table of Contents
Advertisement
2-7.
End of update
If update is completed, it will be displayed as "Update
was completed. Close this Update Program".
(Example of screen)
2-8.
End of application
The upper right [x] button is pushed and application is
ended.
2-11. Error・Warning list
Error No.
[ERROR:001]
Command transmission was failed. (Securement of communication pathway)
[ERROR:002]
Command transmission was failed. (Acquisition of communication control authority)
[ERROR:003]
Command transmission was failed. (Control authority open)
[ERROR:004]
Command transmission was failed. (Disconnection of communication pathway )
[ERROR:005]
Communication pathway couldn't be secured.
[ERROR:006]
Control authority couldn't be obtained.
[ERROR:008]
An illegal command has been being transmitted.
[ERROR:009]
Not an update mode.
[ERROR:101]
Command transmission was failed. (Update changeover)
Command transmission was failed. (File writing)
[ERROR:102]
Please power off and power on. And Restart this Update Program.
[ERROR:103]
Command transmission was failed. (Restart order)
[ERROR:104]
Command transmission was failed. (Version acquisition)
[ERROR:105]
Command transmission was failed. (Acquisition of device name)
[ERROR:106]
Update changeover was failed.
File writing was failed.
[ERROR:107]
Please power off and power on. And Restart this Update Program.
[ERROR:108]
Version acquisition was failed.
[ERROR:109]
Obtaining device name was failed.
[ERROR:110]
The command is wrong.
[ERROR:111]
Data fi le not found.
[WARNING:304] Reading of serial number was failed.
2-9.
Power OFF of RSio64-D
1） DIP switch is set as the normal mode.
All Off
1 2 3 4 5 6 7 8
2) Power switch of RSio64-D is turned off.
2-10. At the time of update failure
The time of an error occurring during writing, and
even if it waits for a long time, when writing is not
completed. Application is once ended. RSio64-D
is rebooted. Firmware update is redone from the
beginning.
Contents
DIP switch
RSio64-D
75
Advertisement
Table of Contents
