Yamaha RSio64-D Service Manual page 56

RSio64-D
2-10. SLOT (1-4) Inspection
Contents: Inspection of WORD CLOCK.
Audio input-and-output inspection.
Check of SLOT COMMUNICATION.
Each CLOCK signal check.
Check of address bus.
Check of a data bus.
Inspection of IRQ.
Check of CON port.
(Example of screen)
OUTPUT result
• Normal condition
The result is displayed in Output window as below.
* "SLOTx" represents number of SLOT.
* "OOO OOOO OOO" shows the result of each BUS.
(O:PASS, X:FAIL)
Item Character string to be displayed
WCK OK: SLOTx WCK MY_WC
OK: SI/SO SLOTx-1
OK: SI/SO SLOTx-3
OK: SI/SO SLOTx-5
OK: SI/SO SLOTx-7
SIO
OK: SI/SO SLOTx-9
(IN=all FPGA)
OK: SI/SO SLOTx-11
OK: SI/SO SLOTx-13
OK: SI/SO SLOTx-15
OK: MUTE_MY
COM OK: SLOTx COMM
OK: MSWCK
OK: MSSYNC
OK: FSMY
FSC OK: SYNC
OK: 64FS & 128FS
OK: 256FS
OK: MS256
OK: SLOTx ADDR BUS(A10..A1)
ADDRESS
OK: SLOTx DATA BUS(D15..D0)
DATA
IRQ OK: SLOTx IRQ
/CON OK: SLOTx CON
56
(SLOT1 only.)
COM is a check of only SLOT1.
OOO OOOO OOO
OOOO OOOO OOOO OOOO
• In case of failure
The result is displayed in Output window as below.
* "SLOTx" represents number of SLOT.
* "SI:xxxxxxxx" represents a hexadecimal read data.
* "Rx len = x" represents the total of read data.
* "Rx = xxh, xxh, xxh, xxh" represents a hexadecimal
read data.
* "(xx)" represents a hexadecimal read data.
* "XXX XXXX XXX " shows the result of each BUS.
(O:PASS, X:FAIL)
Item Character string to be displayed
WCK NG: SLOTx WCK MY_WC COUNT=xxxx
NG: [SO:12345670 -- >SI:xxxxxxxx] SI/SO SLOTx-1
NG: [SO:12345671 -- >SI:xxxxxxxx] SI/SO SLOTx-3
NG: [SO:12345672 -- >SI:xxxxxxxx] SI/SO SLOTx-5
NG: [SO:12345673 -- >SI:xxxxxxxx] SI/SO SLOTx-7
NG: [SO:12345674 -- >SI:xxxxxxxx] SI/SO SLOTx-9
NG: [SO:12345675 -- >SI:xxxxxxxx] SI/SO SLOTx-11
NG: [SO:12345676 -- >SI:xxxxxxxx] SI/SO SLOTx-13
NG: [SO:12345677 -- >SI:xxxxxxxx] SI/SO SLOTx-15
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
SIO
(IN=all FPGA)
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
NG: MUTE_ON [SO:12345678 -- >
NG: SLOTx COMM
COM Rx len = x
Rx = xxh, xxh, xxh, xxh
NG: MSWCK
NG: MSSYNC
NG: FSMY
FSC NG: SYNC
NG: 64FS & 128FS (xx)
NG: 256FS (xx)
NG: MS256 (xx)
NG: SLOTx ADDR BUS(A10..A1)
ADDRESS
NG: SLOTx DATA BUS(D15..D0)
DATA
IRQ NG: SLOTx IRQ
/CON NG: SLOTx CON
SI: xxxxxxxx] SI/SO SLOTx-1
SI: xxxxxxxx] SI/SO SLOTx-3
SI: xxxxxxxx] SI/SO SLOTx-5
SI: xxxxxxxx] SI/SO SLOTx-7
SI: xxxxxxxx] SI/SO SLOTx-9
SI: xxxxxxxx] SI/SO SLOTx-11
SI: xxxxxxxx] SI/SO SLOTx-13
SI: xxxxxxxx] SI/SO SLOTx-15
XXX XXXX XXX
XXXX XXXX XXXX XXXX