Table of Contents
Advertisement
RSio64-D
1-8.
Test procedure
(The display for inspection)
3. Start inspection.
1. Select "RSio64-D-Service".
3. Start inspection.
1) Check that [RSio64-D-Service] is selected in the tree window.
* If it is not selected, select [RSio64-D-Service].
2) Check that all items to be checked are marked with check marks in the list window.
* To mark all items to be checked with check marks, click the [ALL ON] button in the tool bar.
* To limit the test items, mark only desired items to be checked with check marks.
3) Start the test in one of the following ways.
• Click [Start] in the Tool bar.
• Click [START] in the Function key.
• Press [F1] on the keyboard.
• Click [Test] – [Start] in the Menu bar.
1-9.
DIP switch setting method after inspection finish.
1. DIP switch is set as the normal mode.
All Off
2. Power switch of RSio64-D is turned off.
50
2. Tick all.
2. Tick also detailed inspection items.
2. Tick all.
DIP switch
1 2 3 4 5 6 7 8
Advertisement
Table of Contents
