Lan Cable; Cash Drawer; Customer Display - EBN Technology X-PPC 710 User Manual

LAN Cable

Connect one end of RJ-45 LAN cable to the LAN port on the back panel of the
device, another end to your internet device.

Cash Drawer

Connect one end of RJ-11 cable to the Cash Drawer port on the back panel of the
device, another end to your cash drawer.
Install the rear I/O board cover onto the device.

Customer Display

A. Hardware Installation
1. Remove the two screws fixing the customer display cover, and then remover
the VFD mounting hole cove from the device and pull out the connector from the
device.
Chapter 1
6