EBN Technology X-PPC 710 User Manual page 30

Left
If you set the Edge to "Smaller", TouchMon will reduce the vertical
position of the right edge. If you set the Edge to "Larger", TouchMon
will extend the vertical position of the left edge.
Right
If you set the Edge to "Smaller", TouchMon will reduce the vertical
position of the right edge. If you set the Edge to "Larger", TouchMon
will extend the vertical position of the right edge.
In some cases, cursor will be behind the finger when you touch the
panel. If you can not see the cursor when you touch down the panel,
you can set X Axis or Y Axis to move the cursor.
Offset X Axis
If you set the Offset X Axis to Smaller, cursor will be moved a pixel of
X Axis to left.
If you set the Offset X Axis to Larger, cursor will be moved a pixel of
X Axis to right.
Offset Y Axis
If you set the Offset Y Axis to Smaller, cursor will be moved a pixel of
Y Axis to top.
If you set the Offset Y Axis to Larger, cursor will be moved a pixel of
X Axis to bottom.
Edge Compensation Switch
You can check Support Edge Compensation check box to
enable/disable this function from left corner.
Chapter 3
29