EBN Technology X-PPC 710 User Manual page 24

Add
The function button is used for serial RS232 controllers only. Press this
button to search the TouchMon serial controllers connected with the
COM ports of the device. Whenever it finds a new TouchMon serial
controller, a new serial controller icon object will be shown in the
controller list window automatically.
USB TouchMon device supports plug and play, the icon object for USB
controller will be shown in the controller list window automatically when
the USB controller is connected with the USB port of the device. And,
the icon object for the USB controller will disappear automatically as
soon as the device was removed from the USB port of the device.
TouchMon PS2 driver support PS2 mouse and TouchMon
touchscreen controller. It can works with both PS2 mouse and
TouchMon touchscreen PS2 controller. After the TouchMon PS2
driver was installed, this utility assumes the PS2 touchscreen controller
exists and is always shown in the controller list window.
Remove
This function button is used for serial RS232 controllers only. This
button will be grayed and disabled automatically when the selected
controller in the controller list window is not RS232 type. Press to
remove and uninstall the selected serial RS232 controller from the
device. Then, this serial RS232 icon object in controller list window
disappears automatically.
USB TouchMon device supports plug and play, the icon object for USB
controller will be shown in the controller list window automatically when
the USB controller is connected with the USB port of the device. And,
the icon object for the USB controller will disappear automatically as
soon as the device was removed from the system USB port.
TouchMon does not allow you to remove/uninstall the PS2 device
driver dynamically. To uninstall the TouchMon PS2 driver, you need to
go to Windows Device Manager to do un-installation. In addition, after
PS2 un-installation, it needs to reboot the device to complete
Chapter 3
23