Edge Compensation - EBN Technology X-PPC 710 User Manual

You can remove all paths you drew by clicking Clear, or exit this screen
by clicking Quit.

3.5. Edge Compensation

Edge Compensation property page contains functions of Edge
Compensation for Top, Bottom, Left, Right, X Axis and Y Axis.
In some cases, if it is difficult to touch items at the edges of the touch
panel, you can set adjustment to reach the edges of the screen
image.
Top
If you set the Edge to "Smaller", TouchMon will reduce the
horizontal position of the top edge. If you set the Edge to "Larger",
TouchMon will extend the horizontal position of the top edge.
Bottom
If you set the Edge to "Smaller", TouchMon will reduce the
horizontal
position of the bottom edge. If you set the Edge to "Larger",
TouchMon will extend the horizontal position of the bottom edge.
Chapter 3
28