Glass Media Installation - Napoleon BHD4P Installation And Operating Instructions Manual

6.8

GLASS MEDIA INSTALLATION

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
DO NOT PLACE ANY MEDIA (GLASS OR VERMICULITE) IN OR AROUND THE PILOT OPENING. THIS WILL
Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this
happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass
can be purchased from your local authorized dealer / distributor.
NOTE: Do not use more media than what was supplied with the appliance.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with
mild dish soap and water, drain, rinse thoroughly and dry before placing around the burner.
NOTE: Glass media may cover the entire media tray. Care should be taken around the pilot mesh.
We recommend that no media should be placed directly on the pilot mesh.
BHD4STG AND BHD4PG ONLY
BHD4STFC AND BHD4FC ONLY
rev C *added the NOTE for supplied media
*FONT UPDATED
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
INTERFERE WITH THE PILOT OPERATION
MEDIA TRAY
MEDIA TRAY
74.2C
PILOT MESH
PILOT MESH
41
EN
W415-1285 / F / 12.21.16