5.1
Warning
• For maintenance use only original factory replacement parts.
• To avoid electrical shock, do not attempt to perform any servic-
ing unless you are qualified to do so.
• Do not perform any service while the Megohmmeter Model
6501/6503 is on any circuit.
• To avoid electrical shock and/or damage to the instrument, do
not let water or other foreign agents into the electronic module.
5.2
Cleaning
The megohmmeter may be gently cleaned with a soft cloth, soap
and water. Dry immediately after cleaning. Avoid water penetration
into the electronic module.
Make sure the megohmmeter and all leads are dry before further
use.
24
Quality AEMC Products Online at:
CHAPTER 5
MAINTENANCE
Warning: If the crank speed LED is not ON
during testing, the reading is not valid.
GlobalTestSupply
www.
.com
Megohmmeter Models 6501/6503
sales@GlobalTestSupply.com