Setup Flow For Ipp Printing - Toshiba E-STUDIO520 Network Administration Manual

Setup Flow for IPP Printing

This equipment can be used with the IPP printer connection for Windows 2000, Win-
dows XP, and Windows Server 2003 in a TCP/IP network. Even though IPP printing can
be used in a local area network, this method is commonly used to print over the Inter-
net. If you allow IPP printing through the Internet, you must configure the DNS server to
enable users to access this equipment over the Internet using the HTTP protocol. This
is useful when users want to print to this equipment from outside the local area network.
Setup procedure
1.
2.
3.
Network Administration Guide — Setup Flow for Printing Features
Connecting over Internet
Setting up the IPP
printer connection
Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
Setting up the DNS Session to be available the services that
use the DNS name with a DNS server.
The DNS Session should be configured when this equipment accesses the
services, servers, and clients using the DNS names instead of IP addresses.
TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the DNS Session
Setting up the DDNS Session if required.
If the DNS server supports the dynamic DNS service, please configure the
DDNS Session to enable the dynamic DNS service.
1. Easy Setup Flow
Windows 2000
Windows XP
Windows Server 2003
19