Toshiba E-STUDIO520 Network Administration Manual page 86

2. Setting up Network Server
Then configure the attribute value for each user.
Creating the schema for Role Based Access Control
NOTE: Before adding the schema for Role Based Access Control for Windows Server 2003,
you must install the Administration Tools Pack. The installation method varies depend-
ing on whether the Service Pack is installed or not.
-
-
1.
2.
3.
4.
5.
6.
7.
8.
NOTE: If "Current DC" does not display the correct domain controller name, select "Specify
Name" and enter the correct domain controller name. Then click [OK].
9.
86
P.88 "Configuring attribute value for each user"
When the Service Pack 1 is not installed:
Right-click the "adminpak.msi" file in the "i386" folder in the Windows Server 2003
CD-ROM and select [Install].
When the Service Pack 1 is installed:
Right-click the "adminpak.msi" file in the "WINDOWS\system32" folder in the local
disk and select [Install].
Click the [Start] menu and select [Run...].
• The Run dialog box appears.
Enter "mmc /a" and click [OK].
• The Console1 window appears.
Click the [File] menu and select [Add/Remove Snap-in...].
• The Add/Remove Snap-in dialog box appears.
Click [Add] in the [Standalone] tab.
• The Add Standalone Snap-in dialog box appears.
Select "Active Directory Schema" and click [Add]. Then
click [Close].
• It returns to the Add/Remove Snap-in dialog box.
Confirm that "Active Directory Schema" is added in the list
and click [OK].
• It returns to the Console1 window.
Right-click "Active Directory Schema" in the left pane of the
Console1 window and select [Change Domain Controller...].
• The Change Domain Controller dialog box appears.
Confirm that "Current DC" displays the correct domain con-
troller name and click [OK].
• It returns to the Console1 window.
Right-click "Active Directory Schema" in the left pane of the
Console1 window and select [Operations Master...].
• The Change Schema Master dialog box appears.
Network Administration Guide — Setting up Role Based Access Control