Setup Flow For Ipp Printing - Toshiba ESTUDIO355 Quick Start Manual

Setup Flow for IPP Printing

This equipment can be used with the IPP printer connection for Windows 2000, Windows XP, Windows
Server 2003, and Windows Vista in a TCP/IP network. Even though IPP printing can be used in the local
area network, this method is commonly used to print over the Internet. If you allow IPP printing through the
Internet, you must configure the DNS server to enable users to access this equipment over the Internet
using the HTTP protocol.
This is useful when users want to print to this equipment from outside the local area network.
Setup Flow
Connect this equip-
ment
Set up the TCP/IP
(IPv4)
Set up the IPv6
Connecting over Internet
Setting up the IPP
printer connection
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Description/Reference
5
45