Setup Flow For Scan To Email - Toshiba E-STUDIO520 Network Administration Manual

1. Easy Setup Flow

Setup Flow for Scan to Email

The Scan to Email feature allows users to send scanned images to Email addresses
over the Internet.
Scan to Email
When configuring the Scan to Email environment, this equipment sends an Email to the
SMTP server and transfers the document to the Internet. A DNS server is required for
the SMTP server to transmit the Scan to Email document into the Internet.
Setup procedure
1.
2.
3.
36
Connecting to Internet
Send email to the Internet
via SMTP server
Setting up the DNS Server and SMTP Server, if required.
When this equipment uses the SMTP server to send an Email, you must
configure the DNS server and SMTP server in your network.
P.77 "Tips of Setting up the DNS and Mail Servers for Email"
Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
Setting up the SMTP Client
You should specify the SMTP server to be used for sending an Email.
TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the SMTP Client
Network Administration Guide — Setup Flow for Scanning Features
SMTP Server
Internet