Toshiba E-STUDIO520 Network Administration Manual page 93

SMB/Point&Print Printing in a Windows Operating System Environment:
No
1
2
3
4
5
6
7
8
9
Network Administration Guide — Troubleshooting Overview
Check...
Are the IP Address proper-
ties correctly set?
Is the Microsoft Computer
Name (Device Name)
unique?
Is the Workgroup name
valid and correctly entered?
Is the WINS server address
correctly set?
If the client computers are
located in different seg-
ments, is the WINS service
correctly provided?
Can you see this equipment
in Windows Network Neigh-
borhood?
Were the proper printer driv-
ers installed?
Is the driver's port name
valid?
Can you print to this equip-
ment?
3. Troubleshooting
Yes No For Instruction, Go To...
Setup the IP address correctly.
Next Step
Setup the device name correctly.
Next Step
Setup the workgroup correctly.
Next Step
Setup the WINS server address
correctly, or enter "0.0.0.0" for the
Next Step
WINS server address to disable
the WINS service.
Setup the WINS server and
enable it on this equipment to
Next Step
allow users access from different
segment.
Refer to following section to trou-
bleshoot the condition.
Next Step
Equipment"
See the Printing Guide to install
Next Step
proper printer drivers.
See the Printing Guide to config-
Next Step
ure proper port.
Refer to following section to trou-
bleshoot the condition.
End
Equipment"
P.107 "Cannot See This
P.108 "Cannot Print To This
93