Ipp Printing - Toshiba e-Studio3005AC Software Installation Manual

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
 IPP printing
This section describes how to set up the printer drivers for IPP printing which is available for Internet connection.
To set up the printer drivers for IPP printing, install the printer drivers by Add Printer Wizard.
Before installing the printer driver for IPP printing, check with your system administrator to make sure of the
following:
 This equipment is connected to the network and turned on.
 The TCP/IP setting is correct on this equipment and your computer.
You can install a printer driver for IPP printing using the Add Printer Wizard.
Perform installation corresponding to your Windows computer.
 To perform installation, you must log onto Windows with the "Administrator" account.
 The certificate must be installed on both MFP and Windows Vista to perform IPP SSL printing from Windows Vista.
For instructions on how to install the certificate, refer to TopAccess Guide.
1 Open the printers folder.
Right-click [Start], then click [Control Panel] > [View devices and printers].
 For Windows 8.1 / Windows Server 2012, right-click in the lower left of the screen, then click [Control Panel] >
[Devices and Printers].
 For Windows 7, click [Start] > [Devices and Printers].
 For Windows Vista / Windows Server 2008, click [Start] > [Control Panel] > [Hardware and Sound] > [Printers].
Click [Add a printer].
2
The [Add Printer] dialog box appears.
Select [Add a network, wireless or Bluetooth printer].
3
Depending on the version of Windows used, this screen does not appear.
Other Installations 67