Setup Flow For Remote Scan - Toshiba E-STUDIO520 Network Administration Manual

4.

Setup Flow for Remote Scan

This equipment provides the Remote Scan driver that allows users to operate scanning
remotely from the Windows computer and import the scanned images into eCopy
ShareScan OP 3.0.
The Remote Scan driver can be used to operate scanning remotely and retrieve
scanned images into eCopy ShareScan OP 3.0 running on your computer. This soft-
ware can be used to retrieve scanned images into eCopy ShareScan OP 3.0.
The Remote Scan driver can connect to this equipment over TCP/IP network.
System Requirements
The Remote Scan driver is available for following environments:
•
•
NOTE: To use the Remote Scan driver, the environments to operate the eCopy ShareScan OP
3.0 are also required. For the system requirements for eCopy ShareScan OP 3.0,
please refer to the documentation for eCopy ShareScan OP 3.0.
Network Administration Guide — Setup Flow for Scanning Features
Setting the Email Settings.
In the Email Settings, you should specify the from address and from name to
enable the Scan to Email. Also you can specify the file format, fragment size,
and body text that apply to the Email sent from this equipment.
User Function Guide
4. SETTING ITEMS (ADMIN)
7. SETTING E-MAIL FUNCTIONS
Setting the Scan to E-mail Message Properties
Setting the Scan to E-mail Fragmentation
TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Email Settings
Setting up the Email Settings
Remotely operate scanning
Originals
using Remote Scan driver
Retrieve scanned images
into eCopy ShareScan OP
OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Required Software
Microsoft Internet Explorer 5.5 SP2 or later must be installed
eCopy ShareScan OP 3.0 must be installed
1. Easy Setup Flow
Connecting over TCP/IP Network
Windows 2000 Windows 2000
Windows XP Windows XP
with eCopy ShareScan OP 3.0 is installed with eCopy ShareScan OP 3.0 is installed
37